Product Description
Application of Net-Trol Wood Cleaner & Colour Restorer
Application tools
- Soft brush
- Stiff bristle/nylon brush
- Pressure washer
- Wear chemical resistant gloves, safety goggles and protective clothing
Caution: Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application. Net-Trol may dull painted surfaces and some metal fixings if left on to long. Rinse off quickly or wipe with a wet cloth.
Application
To use Net-Trol on wood:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry for 48 hours or until it meets the moisture content required by the chosen finish before finishing
To use Net-Trol on stone or concrete:
- First wet the surface with fresh, clean water
- Apply Net-Trol with a synthetic brush or roller (medium or long pile)
- Scrub the surface with a stiff nylon/synthetic brush
- Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
- Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
- If required repeat procedure
- Allow to dry until it meets the moisture content required by your chosen finish or sealer
To use Net-Trol on nail stains:
- First clean the surface
- After cleaning wet the surface with fresh clean water
- Apply Net-Trol to the entire surface over and around the nail stain
- Do not rinse until the stain has disappeared
To use Net-Trol on plastic or GRP:
- First wet the surface with fresh clean water
- Apply Net-Trol using a brush
- Leave it to work for 10 minutes
- Scrub the surface with a soft or medium nylon scrubbing brush
- Rinse with large amounts of fresh clean water
To use Net-Trol on rust stains:
- First wet the surface with fresh clean water.
- Apply Net-Trol with a stiff nylon scrubbing brush working it into the rust stain
- Leave to work for 10 minutes
- Scrub surface with stiff nylon scrubbing brush
- Rinse with large amounts of fresh clean water
Clean Up
Clean all tools used with soap and water.
After Clean Up
We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes.
Things to Remember
- Shake container thoroughly before use.
- Cover any areas you want to protect.
- Thoroughly wet surrounding plants and shrubs.
- Apply between 5˚C and 35˚C.
- Do not apply on a hot surface as the product will dry too quickly.
- If cleaning vertical wood, work from bottom to top to avoid streaking
| Coverage: | 5-10m2 per litre |
| Tools: | Soft brush, stiff bristle/nylon brush, powerwasher |
| Suitable for: | Exterior use |
| Clean up: | Water |
| Working Time: | 5-20 mins |
| Suitable Surfaces: | All exterior wood surfaces, cement, stone, plastic, GRP |
