Armour Flex Hardwax Oil

£23.00

Armourflex^® Hardwax Oil for wooden floors and furniture.

Armourflex® Hardwax Oil is tough, durable and water repellent. Containing a blend of natural oils and waxes, suitable for protecting and enhancing the durability of all interior wood surfaces including hardwood, softwood, parquet and veneer. Resistant to common stains such as wine, beer, fruit juice, carbonated soft drinks, tea, and coffee.

Natural Oil / Waxed Based
Stain, Dirt & Scratch Resistant
For Interior Use
Manufactured in the UK

Sizes: 1 Litre

Product Description

Carry out a test patch before starting any project.

Ensure good ventilation is maintained during application and throughout the drying process. Ready to use, do not thin.
Stir thoroughly before use. Apply in thin coats using a short pile roller, good quality brush or lint-free cloth. Over-application can reduce the finish quality and prolong drying time. On previously treated timber 1 coat is normally sufficient, maximum of 2 coats may be required if applying to fresh or previously untreated timber.

Coverage: Approximately 24-28 m²/l (One Coat), 12-16 m²/l (two coats), depending on substrate absorbency and smoothness.

Drying Time: 6-8 hours under average climatic conditions (23^oC, 50% humidity). Preferably allow to dry overnight. Variations in ambient conditions and substrate can affect drying times.
Suitable for light foot traffic approximately 16 hours after final coat.

Equipment Cleaning: Clean brushes/rollers with Barrettine White Spirit immediately after use. If spilled, wipe off immediately with a cloth dampened with Barrettine White Spirit.

Precaution: Cloths used for oiling could, under certain conditions, self-combust. Immediately after use, soak them in soapy water then lay them flat outside on a non-combustible surface to dry.