Product Description
Fiddes Hard Wax Oil is a blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.
Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below.
Suitable for application onto children’s toys – EN 71-Toy Safety Certification
Resistant to liquids: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS3900 E15
Tinted Hard Wax Oil
A range of transparent tinted Hard Wax Oils have been formulated, offering excellent depth of colour and clarity. A third and final coat of Clear Hard Wax Oil is advisable in areas subjected to heavy wear.
| PREPARATION | Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust. |
|---|---|
| APPLICATION | Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning. |
| FIRST COAT | Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. |
| SECOND COAT | Apply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level. |
| RENOVATION | To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly. |
| COVERAGE | A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate. |
